leftcoastdeac
Robert O'Kelley
- Joined
- Mar 17, 2011
- Messages
- 8,450
- Reaction score
- 1,730
Was reading online about this and found a site that recommended either the deep scan stud finders or take a very strong magnet and tie it to a string. Since the wood lath is nailed to the studs, the strong magnet should stick some to those nails. You may have to move the magnet around, up and down, but that might work. You could also look at your outlets as those should be mounted to studs.
Tried the magnet trick previously with no luck; Deep scan stud finder worked great.